Brick Veneer Installation in Kokomo, IN

Reliable, professional brick veneers in Kokomo, IN from Superior Masonry Kokomo. Contact us today for a free on-site estimate.

Superior Masonry Kokomo provides professional brick veneers throughout Kokomo, IN, Indiana and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (765) 523-8258 or request your free quote.

Brick Veneers for Kokomo Homes and Businesses

Brick veneers give Kokomo property owners the look of solid brick without the weight or cost of full masonry walls. Instead of building a wall entirely out of brick, a brick veneer is a single outer layer tied to a wood, steel, or concrete backup wall. You still get real masonry, real mortar joints, and real curb appeal.

At Superior Masonry Kokomo, we see brick veneers used on everything from 1960s ranch homes in the Maple Crest and Indian Heights areas to newer commercial buildings around US-31. Homeowners often call us when existing siding is faded, when an old brick facade is bowing or cracked, or when they are adding an entryway or garage and want it to match the original brick look.

Our focus is on durable, code-compliant installation that stands up to Indiana freeze-thaw cycles, wind-driven rain, and temperature swings. Done properly, a brick veneer should handle decades of winters in Kokomo without loose bricks, bulging walls, or water problems inside the structure.

How Brick Veneer Installation Works Step by Step

A quality brick veneer project follows a clear sequence, and skipping any step is usually why problems show up a few years later.

1. Site visit and measurement. We start by walking the property with you, measuring walls, checking the existing framing or masonry, and looking at how water currently drains off the roof and around the foundation. In Kokomo, we pay close attention to snow load paths and areas where ice dams might form, since those are common leak points behind veneers.

2. Substrate and framing prep. For wood-framed walls, we inspect sheathing for soft spots, mold, or prior water damage and replace any compromised panels. For block or poured concrete walls, we clean and repair cracks so the new veneer ties in correctly.

3. Weather barrier and flashing. We install building wrap or other moisture barrier over the sheathing, then add metal flashings at the base of the wall, above windows and doors, and at roof tie-ins. In Indiana’s climate, this step is essential to keep wind-driven rain from getting into the wall cavity.

4. Weep system and air gap. We create a consistent drainage cavity between the backup wall and the brick veneer, usually 1 inch, and install weep vents or open head joints at the base and above openings so any moisture can escape. Many veneer failures we repair in Kokomo come from missing or clogged weep paths.

5. Anchors and ties. Corrosion-resistant brick ties are fastened into the studs or masonry backup on a measured grid. These ties are what connect the veneer to the structure, and their spacing and embedment are critical to prevent bulging during high winds.

6. Brick laying and tooling. Our masons lay the brick in your chosen pattern, striking and tooling joints as we go so they are tight, smooth, and consistent. We adjust bond patterns around corners, windows, and doors so cut bricks are placed where they are least visible.

7. Final detailing and clean up. Once the masonry has set, we clean the brick surface without damaging the face or the mortar joints, then inspect all weeps, sealant joints, and flashings with you before we consider the job complete.

Design and Material Options for Brick Veneers

Superior Masonry Kokomo helps you select brick and details that fit both your taste and the local architecture. We can usually get close matches for the orange-red and brown blends common in older Kokomo subdivisions, as well as modern grays and tumbled textures seen on newer builds.

Color and texture. You can choose from smooth, wire-cut, or tumbled face bricks. Smooth bricks give a more formal look, while tumbled bricks bring a softer, historic feel that works well on older homes near downtown Kokomo. We can bring sample boards to your home so you can see how they look in your actual light.

Patterns (bonds). Running bond is the most common, but accent patterns can be added around windows, along the top of the wall, or at porch columns. We sometimes use soldier courses above garage doors in newer neighborhoods or add a rowlock course along porch caps for a more custom appearance.

Trim details. Brick veneers can include features like quoin corners, arches over entry doors, or contrasting bands. In our area, a popular upgrade is a brick water table that separates a brick lower wall from siding above, which can help protect lower walls from lawn equipment and winter salt spray.

Integration with existing materials. Many Kokomo homes combine brick on the front elevation with siding on the sides and rear. We pay special attention to the transition lines so the new veneer looks intentional, not tacked on. This includes aligning courses with existing brick, matching mortar color, and setting proper trim depths around windows so they do not look sunken.

What Affects the Cost of Brick Veneer Installation in Kokomo

Homeowners often ask why quotes can vary so much for brick veneers. Several specific factors drive the final price in the Kokomo market.

Wall area and layout. Straight, single-story walls are the most economical. Costs increase with multiple corners, bump outs, gables, and tall two-story walls that require more staging and safety setup.

Tear-off and repairs. If we are removing old siding, failing stone veneer, or damaged brick, labor and disposal costs are added. We frequently find hidden sheathing issues behind older siding in Kokomo, especially on weather-facing walls, and we will discuss any needed repairs with you before proceeding.

Brick selection and accents. Standard modular brick in a common color is the most budget friendly. Premium tumbled or handmade bricks, special shapes for sills or arches, and contrasting accent courses increase material costs.

Access and timing. Tight lot lines, decks that block wall access, and obstacles like HVAC units or mature landscaping can slow production. Projects done in late fall or early spring sometimes require cold-weather masonry measures, such as heated water and protection enclosures, which modestly affect cost but keep quality high.

Moisture and structural upgrades. In some homes we recommend additional flashing work, extra weeps, or more robust anchors to handle wind exposure. These upgrades increase up-front costs but are far cheaper than repairing water or movement issues later.

At Superior Masonry Kokomo, we provide detailed written estimates that break down labor, material, and any repair allowances so you understand exactly where your dollars are going.

Local Issues We Solve With Brick Veneers

Kokomo’s climate and building history create some recurring veneer issues that we are called to fix or prevent.

Freeze-thaw damage. Water that gets behind a poorly installed veneer will expand when it freezes, which leads to spalled brick faces, cracked mortar, and bulging sections of wall. We address this by improving drainage, adding or reopening weep joints, and replacing damaged units with compatible brick.

Settling and foundation movement. In some older neighborhoods and rural properties outside Kokomo, minor foundation movement can cause step cracking in brick veneers. We evaluate whether the cracking is cosmetic or structural. For cosmetic cracking, we perform tuckpointing with a mortar that matches the original. For structural concerns, we coordinate with foundation specialists before rebuilding affected veneer sections.

Leaking around windows and doors. Many veneer leaks show up as stained drywall or musty smells around openings. The fix typically involves removing a section of brick, installing or correcting head flashing and end dams, then rebuilding the veneer with proper weep paths.

Salt and deicing exposure. Along driveways and near sidewalks, winter salt can damage lower brick courses over time. When we install veneers in these areas, we choose more durable brick types, detail a slightly higher water table, and recommend maintenance washing practices to limit salt buildup.

What to Know Before You Hire a Brick Veneer Contractor

Before committing to a brick veneer project, Kokomo homeowners should understand a few key points that can protect their investment.

Permits and codes. In most cases, exterior veneer work on occupied homes falls under local building requirements. Superior Masonry Kokomo is familiar with area code expectations for brick ties, wall cavities, and flashing and can coordinate with inspectors as needed.

Moisture management is not optional. Any contractor who suggests skipping the air gap, minimizing weeps, or relying on caulk alone to keep water out is putting your home at risk. Ask how they create drainage and ventilation behind the veneer and what materials they use for flashings.

Experience with matching existing brick. If you are adding onto a home or repairing one wall, ask to see previous match work. We maintain photos and supplier notes on local brick lines that are common in Kokomo so we can get as close as possible to your existing look.

Schedule and weather windows. In our climate, we plan most veneer work for temperatures above freezing, especially overnight. If your project must happen in colder months, clarify how the contractor will protect newly laid masonry from rapid freezing.

Warranty and follow-up. Quality veneer work should come with both a workmanship warranty and manufacturer warranties on brick and materials. We also encourage a quick inspection one year after completion so we can address any settling cracks early if they appear.

Our Process With Superior Masonry Kokomo

Working with Superior Masonry Kokomo on a brick veneer installation is straightforward and customer focused.

Consultation and planning. We start with an on-site meeting, discuss your goals and budget, photograph the existing structure, and talk through color and layout options. We then provide a written proposal that spells out scope, materials, and timeline.

Pre-construction coordination. Once approved, we schedule around your family or business needs. We order brick and materials, confirm color selections, and review protection plans for landscaping, walkways, and neighboring properties.

Active construction. During the build, a lead mason is on site to manage layout, bond patterns, and details at corners and openings. We keep the area as clean and organized as possible, manage dust and debris, and provide you with progress updates.

Final walkthrough and care guidance. When the brick veneer is complete, we walk the project with you, review weep locations, flashing lines, and control joints, and provide simple maintenance tips for cleaning and seasonal inspection. Our goal is that your new brick veneer looks like it has always belonged on your Kokomo property and that you understand how it is protecting your home or business.